nagios監控WIN2003
nagios監控WIN2003的具體步驟如下：
在我的實驗室用nagios來監控SERVER的性能，其中mothership為host,win2003,servers 為RHEL56臺。
1.useradd nagios
2.mkdir -v /usr/local/nagios,chown nagios.nagios /usr/local/nagios
3.解壓nagios.tar.gz
./configure --prefix=prefix --with-nagios-user=someuser --with-nagios-group=somegroup --with-command-group=cmdgroup
#變量prefix 為安裝目錄，例如/usr/local/nagios
#變量someuser 為nagios的用戶，例如nagios
#變量somegruop 為nagios屬于的組，例如nagios
#變量cmdgroup 為nagios命令行屬組，例如nagcmd
4.安裝
make all
make install
make install-config
make install-init
5.建立HTTP用戶驗證文件
htpasswd -c /usr/local/nagios/etc/htpasswd.users nagios
#p#
6.修改httpd.conf,加入這樣幾行
ScriptAlias /nagios/cgi-bin /usr/local/nagios/sbin
< Directory " /usr/local/nagios/sbin" >
Options ExecCGI
AllowOverride None
Order allow,deny
Allow from all
AuthName " Nagios Access"
AuthType Basic
AuthUserFile /usr/local/nagios/etc/htpasswd.users
Require valid-user
< /Directory>
Alias /nagios /usr/local/nagios/share
< Directory " /usr/local/nagios/share" >
Options None
AllowOverride None
Order allow,deny
Allow from all
AuthName " Nagios Access"
AuthType Basic
AuthUserFile /usr/local/nagios/etc/htpasswd.users
Require valid-user
< /Directory>
#p#
7.修改CGI驗證
cd /usr/local/nagios/etc vi cgi.cfg 修改use_authentication=1，在cgi.cfg中指定user為nagios,并且修改chmod -R 777 /usr/local/nagios/var/rw
8.修改nagios.cfg 取消windows.cfg的注釋
9. 配置windows.cfg
host=要監控的主機名，IP，然后可以自己定制服務。具體command可以在command.cfg中找
10 利用/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg 來檢查配置，然后service nagios restart ,當然，service httpd restart.
11.client的設置
在WIN2003上安裝NSCLIENT++，進入安裝目錄，nsclient.exe /install ; nsclient.exe SysTray install ; nsclient.exe /start ;
修改NSC.INI文件，取消
FileLogger.dll
CheckSystem.dll
CheckDisk.dll
NSClientListener.dll
NRPEListener.dll
SysTray.dll
CheckEventLog.dll
CheckHelpers.dll
的注釋，allow_hosts 設置可以監控的服務器IP，password為通信密碼，默認沒有
12.檢查狀態，檢查TCP12489端口是否打開
通過上文的十二步，想必大家都學會了nagios監控SERVER的性能WIN2003，希望本文對你們有用！
【編輯推薦】
